Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes




Hyundai Elantra - Petrol engines 1,6, 1,8 and 2,0l

Specifications of petrol engines

Specifications of petrol engines of 1,8 and 2,0 l

The general data

Data
Value
Quantity of cylinders
4
Diameter of the cylinder (2,0/1,8), mm
82
Piston stroke, mm
    2,0 l
93,5
    1,8 l
85
Working volume, sm3
    2,0 l
1975
    1,8 l
1795
Degree of compression (2,0/1,8)
10,1
Operating procedure of cylinders (2,0/1,8)
1–3–4–2

Specifications

The name
Rating values
Phases timing (except CVVT)
– The inlet valve
    Opening (to ВМТ), °
9
    Closing (after НМТ), °
43
– The final valve
    Opening (to ВМТ), °
50
    Closing (after НМТ), °
6
Phases timing (CVVT)
– The inlet valve
    Opening (to ВМТ), °
11
    Closing (after НМТ), °
59
– The final valve
    Opening (to ВМТ), °
42
    Closing (after НМТ), °
6
The block of cylinders
Diameter of the cylinder, mm
82,00–82,03
Deviation from the form of a circle and конусность the cylinder, mm
Less than 0,01
Backlash between the piston and the cylinder, mm
0,02–0,04
The piston
Diameter of the piston, mm
81,97–82,00
The repair sizes of pistons increased by mm
0,25, 0,5, 0,75 and 1,0
Piston rings
Lateral backlash of piston rings, mm

– A ring №1

0,04–0,08

– A ring №2

0,003–0,07
Backlash in locks of piston rings, mm

– A ring №1

0,23–0,38

– A ring №2

    2,0 l
0,33–0,48
    1,8 l
0,45–0,60
маслосъемное a ring
0,20–0,60
The repair sizes increased by mm
0,25, 0,5, 0,75 and 1,0
Rod
Rod bend, mm on 100 mm of length
0,05
Rod torsion, mm on 100 mm of length
0,1
Lateral backlash between the bottom head of a rod and cranked shaft, mm
0,100–0,250
The loose leaf шатунного the bearing
Loose leaf backlash шатунного the bearing, mm
0,024–0,044
The repair sizes reduced by mm
0,25, 0,5 and 0,75
Camshafts (except CVVT)
Height of cams of a camshaft, mm

– The inlet valve

44,82

– The final valve

44,72
Camshafts (with CVVT)
Height of cams of a camshaft, mm

– The inlet valve

44,618

– The final valve

44,518
Diameter of necks of a camshaft, mm
28
Oil backlash in the bearing of sliding of a camshaft, mm
0,02–0,061
Axial люфт a camshaft, mm
0,1–0,2
Cranked shaft
Diameter шатунной necks of a cranked shaft, mm
45
Diameter of a radical neck of a cranked shaft, mm
57
Bend, mm
0,03
Deviation from the form of a circle of necks of a cranked shaft, mm
0,01
Конусность necks of a cranked shaft, mm
0,01
Axial люфт a cranked shaft, mm
0,06–0,260
The repair sizes шатунных necks of a cranked shaft, mm

– Increased by 0,25 mm

44,725–44,740

– Increased by 0,50 mm

44,475–44,490

– Increased by 0,75 mm

44,225–44,240
The repair sizes of radical necks of a cranked shaft, mm

– Increased by 0,25 mm

56,727–56,742

– Increased by 0,50 mm

56,477–56,492

– Increased by 0,75 mm

56,227–56,242
Flywheel
Flywheel palpation, mm
0,1
Valves
Length of the valve, mm

– The inlet valve

114,34

– The final valve

116,8
Diameter of a core of the valve, mm

– The inlet valve

5,965–5,98

– The final valve

5,950–5,965
Width of a contact surface of a plate of the valve, mm

– The inlet valve

1,15

– The final valve

1,35
Backlash between a core of the valve and the directing plug, mm

– The inlet valve

0,02–0,05

– The final valve

0,035–0,065
The directing plug of the valve
Length of the directing plug of the valve, mm

– The inlet valve

46

– The final valve

54,5
The repair sizes of the directing plug of the valve, increased by mm
0,05, 0,25, 0,50
Valve saddle
Width of a contact surface of a saddle of the valve, mm

– The inlet valve

1,1–1,5

– The final valve

1,3–1,7
Corner of a working facet of a saddle of the valve, °
45
The repair sizes of a saddle of the valve, increased by mm
0,3, 0,6
Valve spring
Length of a spring of the valve without loading, mm
48,86
Length under loading of 18,3 kg, mm
39
Length under loading of 40,0 kg, mm
30,5
Deviation of a spring of the valve from vertical position, °
Less than 1,5
Klapannye backlashes
Klapannye backlashes on the cold engine, mm

– The inlet valve

0,2

– The final valve

0,28
Klapannye backlashes on the hot engine, mm

– The inlet valve

0,29

– The final valve

0,34
Head of cylinders
Deviation from planeness привалочной surfaces, mm
0,03
Deviation from planeness привалочной collector surfaces, mm
0,15
The repair sizes of an aperture for installation of a saddle of the valve
– The inlet valve, mm
    Increased by 0,3 mm
33,300–33,325
    Increased by 0,6 mm
33,600–33,625
– The final valve, mm
    Increased by 0,3 mm
28,800–28,821
    Increased by 0,6 mm
29,100–29,121
The repair sizes of an aperture for installation of the directing plug of inlet and final valves, mm

– Increased by 0,50 mm

11,05–11,068

– Increased by 0,05 mm

11,25–11,268

– Increased by 0,25 mm

11,50–11,518
The air filter
Type
The dry
Element
Nonwoven fabric
System of a suspension bracket of mufflers
Rubber suspension brackets
The muffler
Type of resonant expansion

The moments of an inhaling of carving connections of petrol engines of 1,8 and 2,0 l, Nm

The name
Rating values
Bolt and nut of fastening of a forward support of the engine
35–50
Bolt of fastening of a stopper of a forward support of the engine
70–90
Bolt of fastening of a stopper of a back support of the engine
70–90
Bolt of fastening of a back support of the engine
35–50
Nut (big) fastenings of the right support
90–110
Nut (small) fastenings of the right support
45–60
Bolts and nuts of fastening of the right support to the engine
50–65
Nut of fastening of a support to a transmission
90–110
Bolts of fastening of a lateral support
45–50
Nut of fastening of a stopper of a back support
50–65
Bolts of fastening of an arm of a stopper of a back support
40–50
Nut of fastening of a stopper of a forward support
50–65
Bolts of fastening of an arm of a stopper of a forward support
40–50
Nuts of fastening of a cover of a rod
50–53
Bolts of fastening of covers of radical bearings
27–33 to tighten on a corner (60–65) °
Bolts of fastening of a flywheel (with МКП)
120–130
Bolts of fastening of a leading disk (with АКП)
120–130
Engine casing
4–6
Directing to a chain
8–10
Thermoprotective casing
15–20
Bolts of fastening of an arm of a pipe of system of cooling
12–15
Bolts and nuts of fastening of an arm of the generator
20–25
Blocking bolt of fastening of the generator
12–15
Assembly bolt of fastening of the generator
20–27
Bolts of fastening of a pulley of the water pump
8–10
Bolts of fastening of the water pump
20–27
The gauge of temperature of a cooling liquid
20–40
Nuts of fastening of an inlet branch pipe of system of cooling
15–20
Bolts and nuts of fastening of a casing of the thermostat
15–20
The oil filter
12–16
Bolts of fastening of the oil pallet
10–12
Drain stopper of the oil pallet
35–45
Bolts of fastening of the mesh oil filter
15–22
The gauge of pressure of oil
13–15
Bolts of fastening of the case of the air filter
8–10
Bolts of fastening of the resonator
4–6
Bolts and nuts of fastening of an inlet collector to a head of cylinders
16–23
Bolts of fastening of a support of an inlet collector to a head of cylinders
18–25
Nuts of fastening of throttle knot to the air chamber
15–20
Nuts of fastening of a final collector to a head of cylinders
43–55
Bolts of fastening of a casing of a final collector
15–20
The oxygen gauge to the forward muffler
50–60
The oxygen gauge to a final collector
50–60
Nuts of fastening of a forward exhaust pipe to a final collector
30–40
Bolts of fastening of an arm of a forward exhaust pipe
30–40
Bolts of fastening of a forward exhaust pipe to каталитическому to neutralizer
40–60
Bolts of fastening of an arm of the main muffler
10–15
Bolts M10 of fastening of a head of cylinders
25 (60–65) ° (60–65) °
Bolts M12 of fastening of a head of cylinders
30 (60–65) ° (60–65) °
Nuts of fastening of an inlet collector
18–25
Nuts of fastening of a final collector
43–55
Bolts of fastening of a cover of a head of cylinders
8–10
Bolts of fastening of covers of bearings of a camshaft
14–15
Bolt of the oil regulating valve
10–12
Filter OCV
41–51
Bolt of fastening CVVT to a camshaft of final valves
66–78
Bolts of fastening of a back plate
8–10
Bolt of fastening of a pulley of a cranked shaft
170–180
Bolt of fastening of a pulley of a camshaft
100–120
Bolts of fastening of the mechanism of a tension of a gear belt
43–55
Bolts of fastening of a casing of a gear belt
8–10
Bolts of fastening of a forward cover
20–27
Bolt of fastening of an intermediate pulley of a gear belt
43–55

Specifications of petrol engines of 1,6 l

The general data

Data
Value
Type
Рядный, with the top arrangement of two camshafts
Quantity of cylinders
4
Diameter of the cylinder, mm
76,5
Piston stroke, mm
87
Working volume, sm3
1599
Compression degree
10
Operating procedure of cylinders
1–3–4–2

Specifications

The name
Rating values
Phases timing
– The inlet valve
    Opening (to ВМТ), °
5
    Closing (after НМТ), °
35
– The final valve
    Opening (to ВМТ), °
43
    Closing (after НМТ), °
5
Head of cylinders
Deviation from planeness привалочной surfaces, mm
No more than 0,03
Deviation from planeness привалочной collector surfaces, mm
The repair sizes of an aperture for installation of a saddle of the valve
0,15
– The inlet valve, mm
    Increased by 0,3 mm
30,7–30,721
    Increased by 0,6 mm
31,0–31,021
– The final valve, mm
    Increased by 0,3 mm
27,3–27,321
    Increased by 0,6 mm
27,6–27,621
The repair sizes of an aperture for installation of the directing plug of inlet and final valves, mm

– Increased by 0,50 mm

11,05–11,068

– Increased by 0,05 mm

11,25–11,268

– Increased by 0,25 mm

11,50–11,518
Camshafts
Height of cams of a camshaft, mm

– The inlet valve

43,4484

– The final valve

43,8489
Diameter of necks of a camshaft, mm
27
Oil backlash in the bearing of sliding of a camshaft, mm
0,035–0,072
Axial люфт a camshaft, mm
0,1–0,2
Valves
Length of the valve, mm

– The inlet valve

91,7

– The final valve

92,3
Diameter of a core of the valve, mm

– The inlet valve

5,955–5,97

– The final valve

5,935–5,95
Width of a contact surface of a plate of the valve, mm

– The inlet valve

1,1

– The final valve

1,3
Backlash between a core of the valve and the directing plug, mm

– The inlet valve

0,03–0,06

– The final valve

0,05–0,08
The directing plug of the valve
Length of the directing plug of the valve, mm

– The inlet valve

12,8

– The final valve

12,8
The repair sizes of the directing plug of the valve, increased by mm
0,05, 0,25, 0,5
Valve saddle
Width of a contact surface of a saddle of the valve, mm

– The inlet valve

0,8–1,2

– The final valve

1,3–1,7
Corner of a working facet of a saddle of the valve, °
45
The repair sizes of a saddle of the valve, increased by mm
0,3, 0,6
Valve spring
Length of a spring of the valve without loading, mm
44
Length under loading of 21,6 kg, mm
35
Length under loading of 45,1 kg, mm
27,2
Deviation of a spring of the valve from vertical position, °
No more than 1,5
The block of cylinders
Diameter of the cylinder, mm
76,50–76,53
Deviation from the form of a circle and конусность the cylinder, mm
No more than 0,01
Backlash between the piston and the cylinder, mm
0,025–0,045
The piston
Diameter of the piston, mm
76,465–76,495
The repair sizes of pistons increased by mm
0,25, 0,50, 0,75, 1,00
Piston rings
Lateral backlash of piston rings, mm

– A ring №1

0,04–0,085

– A ring №2

0,04–0,085
Backlash in locks of piston rings, mm

– A ring №1

0,15–0,30

– A ring №2

0,30–0, 45

маслосъемное a ring

0,2–0,7
Rod
Rod bend, mm on 100 mm of length
0,05
Rod torsion, mm on 100 mm of length
0,1
Lateral backlash between the bottom head of a rod and cranked shaft, mm
0,100–0,250
Oil backlash between a neck of a cranked shaft and a rod, mm
0,018–0,036
The repair sizes reduced by mm
0,25, 0,50, 0,75
Cranked shaft
Diameter шатунной necks of a cranked shaft, mm
45
Diameter of a radical neck of a cranked shaft, mm
50
Bend, mm
0,03
Deviation from the form of a circle of necks of a cranked shaft, mm
0,005
Конусность necks of a cranked shaft, mm
0,005
Axial люфт a cranked shaft, mm
0,05–0,175
The repair sizes шатунных necks of a cranked shaft, mm

– Increased by 0,25 mm

44,725–44,740

– Increased by 0,50 mm

44,475–44,490

– Increased by 0,75 mm

44,225–44,240
The repair sizes of radical necks of a cranked shaft, mm

– Increased by 0,25 mm

49,727–49,742

– Increased by 0,50 mm

49,477–49,492

– Increased by 0,75 mm

49,227–49,242
Flywheel
Flywheel palpation, mm
0,1
The air filter
The dry
Type
Nonwoven fabric
Element
The rubber
System of a suspension bracket of mufflers
Suspension brackets
The muffler
Type of resonant expansion

Hermetic

Data
Value
The gauge of temperature of a cooling liquid
LOCTITE 262 № 1324 or equivalent
The gauge of pressure of oil
3М ATD №8660 or Three bond №1141Е

Cooling liquid

Data
Value
Concentration

– Tropical area

40 %

– Other areas

50 %
Cooling liquid
On a basis этиленгликоля

The moments of an inhaling of carving connections of petrol engines of 1,6 l, Nm

The name
Rating values
Bolt and nut of fastening of a forward support of the engine
40–55
Raspornyj bolt of a support of the engine
45–55
The gauge of pressure of oil
13–15
Bolts of fastening of a head of cylinders
30 90 ° to weaken 30 90 °
Bolts and nuts of fastening of an inlet collector to a head of cylinders
15–20
Nuts of fastening of a final collector to a head of cylinders
25–30
Bolts of fastening of a cover of a head of cylinders
8–10
Bolts of fastening of covers of bearings of a camshaft
12–14
Bolt of fastening of a back plate
32–35
Nuts of fastening of a cover of a rod
32–35
Bolts of fastening of covers of radical bearings
55–60
Bolts of fastening of a flywheel (with a mechanical transmission)
120–130
Bolts of fastening of a leading disk (with an automatic transmission)
120–130
Bolt of fastening of a pulley of a cranked shaft
140–150
Bolt of fastening of a pulley of a camshaft
80–100
Bolts of fastening of the mechanism of a tension of a gear belt
20–27
Bolt of fastening of a directing roller of a gear belt
43–55
Bolts of fastening of a casing of a gear belt
8–10
Bolts of fastening of a forward cover
20–27
Nut (big) fastenings of the right support
90–110
Nut (small) fastenings of the right support
45–60
Bolts and nuts of fastening of the right support to the engine
50–65
Nut of fastening of a support to a transmission
90–110
Bolts of fastening of a lateral support
45–50
Nut of fastening of a stopper of a back support
50–65
Bolts of fastening of an arm of a stopper of a back support
40–50
Nut of fastening of a stopper of a forward support
50–65
Bolts of fastening of an arm of a stopper of a forward support
40–50
The oil filter
12–16
Bolts of fastening of the oil pallet
10–12
Drain stopper of the oil pallet
35–45
Bolts of fastening of the mesh oil filter
15–22
Bolts and nuts of fastening of an arm of the generator
20–25
Blocking bolt of fastening of the generator
12–15
Assembly bolt of fastening of the generator
20–27
Bolts of fastening of a pulley of the water pump
8–10
Bolts of fastening of the water pump
12–15
The gauge of temperature of a cooling liquid
25–30
Nuts of fastening of an inlet branch pipe of system of cooling
17–20
Bolts and nuts of fastening of a casing of the thermostat
15–20
Bolts of fastening of the case of the air filter
8–10
Bolts of fastening of the resonator
4–6
Bolts of fastening of a support of the air chamber to the block of cylinders
18–25
Nuts of fastening of throttle knot to the air chamber
15–20
Bolts of fastening of a casing of a final collector
15–20
The oxygen gauge to a final collector
50–60
Nuts of fastening of a forward exhaust pipe to a final collector
30–40
Bolts of fastening of an arm of a forward exhaust pipe
30–40
Bolts of fastening of a forward exhaust pipe to каталитическому to neutralizer
40–60