Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
- Cooling system
Specifications
Check of tightness of system of cooling
Check of a cover of a radiator under pressure
Check of density of a cooling liquid
Tubes and hoses of system of cooling
The water pump
Radiator
Radiator cover
The thermostat
The gauge of temperature of a cooling liquid
The engine of the fan of a radiator of cars with diesel engines of 2,0 l
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
The water pump
The water pump of engines of 2,0/1,8 l
Removal
|
|
Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of a cooling liquid of the water pump.
Remove поликлиновой a belt and a pulley of the water pump.
Remove casings of a gear belt and a roller of a tension of a gear belt.
Turn out bolts of fastening of the water pump, then remove a generator support.
Remove the water pump from the block of cylinders.
|
|
Check
|
|
|
|
Check up each detail on absence of cracks, damages or deterioration and if necessary replace the pump in gathering.
|
Turn a shaft of the water pump and check up smoothness of rotation in the absence of noise.
Check up absence of leaks of a cooling liquid from the pump. If there is a leak from an aperture With, pump consolidation is faulty. If necessary, replace the water pump.
|
|
Installation
|
|
Clear of the rests of a lining and an alien material a surface of consolidation of the water pump.
|
|
Establish on the water pump a new lining, establish the pump and fix its bolts. The inhaling moment: 20–27 Nm.
|
Establish a roller of a tension of a gear belt and adjust a belt tension.
Establish casings of a gear belt.
Establish a pulley of the water pump and поликлиновой a belt, then adjust a belt tension.
Fill in in cooling system necessary quantity of a demanded cooling liquid.
Connect a wire to the negative plug of the storage battery. Start up the engine and check up absence of leaks from cooling system.
|
|
The water pump of engines of 1,6 l
Removal
|
|
Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of a cooling liquid of the water pump.
Remove поликлиновой a belt and a pulley of the water pump.
Remove casings of a gear belt and a roller of a tension of a gear belt.
Turn out bolts of fastening of the water pump, then remove a generator support.
Remove the water pump from the block of cylinders.
|
|
Check
|
|
Check up each detail on absence of cracks, damages or deterioration and if necessary replace the pump in gathering.
Turn a shaft of the water pump and check up smoothness of rotation in the absence of noise.
|
|
Check up absence of leaks of a cooling liquid from the pump. If there is a leak from an aperture With, pump consolidation is faulty. If necessary, replace the water pump.
|
|
|
Installation
|
|
Clear of the rests of a lining and an alien material a surface of consolidation of the water pump.
|
|
Establish on the water pump a new lining, establish the pump and fix its bolts. The inhaling moment: And: 12–15 Nm In: 20–27 Nm.
|
Establish a roller of a tension of a gear belt and adjust a belt tension.
Establish casings of a gear belt.
Establish a pulley of the water pump and поликлиновой a belt, then adjust a belt tension.
Fill in in cooling system necessary quantity of a demanded cooling liquid.
Connect a wire to the negative plug of the storage battery. Start up the engine and check up absence of leaks from cooling system.
|
|
The water pump of diesel engines of 2,0 l
Removal
|
|
Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of a cooling liquid of the water pump.
Remove поликлиновой a belt and an arm of a support of the engine.
Remove a casing of a gear belt and the mechanism of a tension of a gear belt.
Turn out bolts of fastening of the water pump.
Remove the water pump from the block of cylinders.
|
|
Check
|
|
Check up each detail on absence of cracks, damages or deterioration and if necessary replace the pump in gathering.
Turn a shaft of the water pump and check up smoothness of rotation in the absence of noise.
Check up absence of leaks of a cooling liquid from the pump. If there is a leak, pump consolidation is faulty. If necessary, replace the water pump.
|
|
Installation
|
|
Clear of the rests of a lining and an alien material a surface of consolidation of the water pump.
Establish a new sealing ring of round section in a flute at a forward end face of a tube of system of cooling and moisten a ring with a cooling liquid. Do not use engine oil or lubricant.
|
|
Establish on the water pump a new lining, establish the pump and fix its bolts. The inhaling moment: 10 mm: 10–12 Nm 14 mm: 48–52 Nm.
|
Establish the mechanism of a tension of a gear belt and a gear belt. Adjust a tension of a gear belt, then establish casings of a gear belt.
Fill in in cooling system necessary quantity of a demanded cooling liquid.
Connect a wire to the negative plug of the storage battery. Start up the engine and check up absence of leaks from cooling system.
|
|
|
|