Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of a cooling liquid
   Tubes and hoses of system of cooling
   The water pump
   Radiator
   Radiator cover
   The thermostat
   The gauge of temperature of a cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










The engine of the fan of a radiator of cars with diesel engines of 2,0 l

Removal

 PERFORMANCE ORDER

    Disconnect a wire from the negative plug of the storage battery. Disconnect a socket from the engine of the fan of a radiator and a plait of wires from a casing. On cars with an automatic transmission disconnect hoses from an oil radiator. Turn out four bolts of fastening of a casing of the fan. Remove a casing together with the engine of the fan of a radiator. Remove a clip and separate the fan from the fan engine.
    Turn out three screws and remove the fan engine.

Check of the engine of the fan of a radiator

 PERFORMANCE ORDER

    Check up that the engine of the fan of a radiator rotates at giving on it pressure from the storage battery.
    Check up that at engine work there are no extraneous noise.

Check of the relay of the engine of the fan of a radiator

 PERFORMANCE ORDER

    From the block of safety locks and the relay in a motor compartment remove the relay of the engine of the fan of a radiator.
    Ohmmeter check up conductivity between contacts 2 and 4.
Point
Numbers of contacts
Conductivity
1–3
ON
1–3
No
OFF
2–4
Is

Installation

Installation is spent to sequences, return to removal.

Be convinced that the fan of a radiator after installation does not contact with a casing.