Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of a cooling liquid
   Tubes and hoses of system of cooling
   The water pump
   Radiator
   Radiator cover
   The thermostat
   The gauge of temperature of a cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










The gauge of temperature of a cooling liquid

Removal

 PERFORMANCE ORDER

    Merge cooling liquid to the level located below the gauge. Disconnect a wire from the negative plug of the storage battery and a socket from the gauge. Remove the gauge of temperature of a cooling liquid.

Check

 PERFORMANCE ORDER

    Heat up the gauge of temperature of a cooling liquid, immersing it in a hot cooling liquid. Measure resistance of the gauge. Resistance: 2,31 – 2,59 Ohm at temperature 20C.

Installation

 PERFORMANCE ORDER

    Put hermetic on a carving of the gauge of temperature of a cooling liquid and screw the gauge, having tightened its demanded moment. Hermetic: Threebond № 1324N or LOCTITE 262 Moment of an inhaling: 20–40 Nm. Connect to the gauge an electric socket. Connect a wire to the negative plug of the storage battery. Fill in in cooling system necessary quantity of a demanded cooling liquid.