Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of a cooling liquid
   Tubes and hoses of system of cooling
   The water pump
   Radiator
   Radiator cover
   The thermostat
   The gauge of temperature of a cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes


3d-land.net hemnes








Check of tightness of system of cooling

 PERFORMANCE ORDER

    Uncover a radiator. Be convinced that level of a cooling liquid reaches a bulk mouth. To establish the device for check of a cover of a radiator to a bulk mouth and create pressure in cooling system. Be convinced that pressure in cooling system remains within 2 minutes

Pressure at check of tightness of system of cooling:

Petrol engines: 140 кПа
Diesel engines: 150 кПа
  1. Do not uncover a radiator on the hot engine as leaving steams can lead to strong burns. Close a cover of a radiator thick rags and slowly turn away a cover before occurrence of hissing of leaving steam. After the steam-out termination slowly turn on, and uncover a radiator.
  2. Be convinced that in the checked up places there is no moisture.
  3. When the device for check is removed, be cautious not to spill cooling liquid from the device.
  4. Be cautious at installation and moving of the device and at check do not damage a bulk mouth of a radiator.
    Otherwise define a place of leak and eliminate it.