Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
- Body
   Specifications
   Adjustment of hinges of a cowl
   Luggage carrier cover
   Luggage space door
   Forward door
   Back door
   Молдинги
   The roof hatch
   The console
   The panel of devices
   Ceiling furnish
   Internal upholstery of salon
   Forward bumper
   Back bumper
   Sitting lobbies
   Back seat
   Seat belts
   Humeral seat belt of back sitting
   Zone seat belt of back sitting
   Search and elimination of malfunctions
Air central air
The electric equipment
Electric schemes










Forward door

Removal and installation

 PERFORMANCE ORDER

    Turn out the screw of fastening of the internal handle and remove it from a door upholstery.
    Turn out screws of fastening of an upholstery of a door.
    Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps. Disconnect electric sockets.
    Remove from a forward door speaker and влагозащитную a film.
    Lower door glass downwards and turn out screws of fastening of glass.
    Remove glass from a forward door.
    Remove directing door glasses.
    Remove the back channel from a door.
    Turn out bolts of fastening of the external handle of a door, the lock and a lock drive. Disconnect sockets from the block of management of a forward door.
    Remove the block of management from a forward door.
    Remove an external rear-view mirror.

Installation is spent to sequences, return to removal. At installation влагозащитной films should not be closed apertures for fixing elements of an upholstery of a door.

Adjustment of position of a door

Check up that the door is closed easily and properly. If the door has люфт, tighten bolts of fastening of hinges of a door.

Attach a protective tape to the sides of a wing located opposite to a loop of a door.

Shock plate of a door

Check up that the door is closed easily and properly. If necessary adjust a door as follows.

 PERFORMANCE ORDER

    If the door lock is established on a shock plate hardly, turn out screws of fastening of a shock plate and, moving it in horizontal and vertical planes, achieve normal closing of a door.
    Adjustment of position of a door concerning adjacent surfaces spend moving of a shock plate to a vertical plane.

For check of smoothness of landing of a shock plate pull the external handle of a door outside and in this position press a door in position of its closing.