Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
- Body
Specifications
Adjustment of hinges of a cowl
Luggage carrier cover
Luggage space door
Forward door
Back door
Молдинги
The roof hatch
The console
The panel of devices
Ceiling furnish
Internal upholstery of salon
Forward bumper
Back bumper
Sitting lobbies
Back seat
Seat belts
Humeral seat belt of back sitting
Zone seat belt of back sitting
Search and elimination of malfunctions
Air central air
The electric equipment
Electric schemes
|
Back door
Removal and installation
|
|
|
|
Turn out the screw of fastening of the internal handle and remove it from a door upholstery.
|
|
|
Turn out screws of fastening of an upholstery of a door.
|
|
|
Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps. Disconnect electric sockets.
|
|
|
Remove from a forward door влагозащитную a film.
|
|
|
Lower door glass downwards and turn out screws of fastening of glass.
|
|
|
Remove operated glass from a back door.
|
|
|
Remove the dividing channel from a back door, then remove glass of a back door.
|
|
|
Remove motionless glass from a back door.
|
|
|
Disconnect draught from the external handle of a door. Turn out bolts of fastening of the lock and a lock drive.
|
|
|
Remove the block of management from a back door.
|
|
|
Installation is spent to sequences, return to removal. At installation влагозащитной films should not be closed apertures for fixing elements of an upholstery of a door.
|
|
|
Adjustment of position of a door
Check up that the door is closed easily and properly, then check up uniformity of backlashes between forward and back, top both bottom parts of a door and a body. Doors and body sides should be парралельны.
Shock plate of a door
Check up that the door is closed easily and properly. If necessary adjust a door as follows.
|
|
If the door lock is established on a shock plate hardly, turn out screws of fastening of a shock plate and, moving it in horizontal and vertical planes, achieve normal closing of a door.
|
|
Adjustment of position of a door concerning adjacent surfaces spend moving of a shock plate to a vertical plane.
|
|
|
|
|
For check of smoothness of landing of a shock plate pull the external handle of a door outside and in this position press a door in position of its closing. |
|
|