Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
- Brake system
Specifications
Check of the vacuum amplifier of brakes
Check of the unilateral vacuum valve
Prorolling of hydraulic system of a drive of brakes
Adjustment of a course of a lay brake
Brake pedal
The vacuum amplifier of brakes
The main brake cylinder
Replacement of lobbies brake pads
Support of a forward brake
Back disk brakes
Back drum-type brakes
Replacement of the working brake cylinder
Pressure regulator
Brake tubes and hoses
Lay brake
Antiblocking system of brakes (ABS)
Hydraulic block HECU
The gauge of frequency of rotation of a wheel
Prorolling of hydraulic system of a drive of brakes with scanner use
Search and elimination of malfunctions
Body
Air central air
The electric equipment
Electric schemes
|
Hydraulic block HECU
Removal
|
|
Disconnect from block HECU brake tubes.
|
|
Turn out bolts of fastening of an arm and remove block HECU together with an arm.
|
|
|
- Do not assort hydraulic block HECU.
- Block HECU transportation is necessary for spending in vertical position with the apertures of the block closed approaching заглушками as the brake liquid should not merge from the block.
|
|
|
Disconnect a socket from block HECU.
|
|
|
Installation
|
|
Installation is spent to sequences, return to removal.
Tighten bolts of fastening of the modulator and a nut of fastening of brake tubes the demanded moments of an inhaling.
The inhaling moments:
Bolt of fastening of block HECU: 8–10 Nm
Connecting nuts of fastening of brake tubes: 13–17 Nm
|
|
|
|