Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
- Brake system
   Specifications
   Check of the vacuum amplifier of brakes
   Check of the unilateral vacuum valve
   Prorolling of hydraulic system of a drive of brakes
   Adjustment of a course of a lay brake
   Brake pedal
   The vacuum amplifier of brakes
   The main brake cylinder
   Replacement of lobbies brake pads
   Support of a forward brake
   Back disk brakes
   Back drum-type brakes
   Replacement of the working brake cylinder
   Pressure regulator
   Brake tubes and hoses
   Lay brake
   Antiblocking system of brakes (ABS)
   Hydraulic block HECU
   The gauge of frequency of rotation of a wheel
   Prorolling of hydraulic system of a drive of brakes with scanner use
   Search and elimination of malfunctions
Body
Air central air
The electric equipment
Electric schemes










Check of the vacuum amplifier of brakes

For simple check of the vacuum amplifier of brakes execute following tests.

 PERFORMANCE ORDER

    Start the engine and in 1–2 minutes stop it. Some times press a pedal of a brake with usual effort. If the first course of a pedal a long and second course is shorter, than the first course is testifies to normal work of the vacuum amplifier of brakes. If the pedal height does not change, means, the vacuum amplifier is damaged. At the switched off engine some times press a brake pedal. Start the engine. If the brake pedal moves downwards at once after engine start, it testifies to normal work of the vacuum amplifier of brakes. If the pedal height does not change, means, the vacuum amplifier is damaged.
    Start the engine. Press a pedal of a brake with usual effort. Stop the engine. Slowly press a pedal of a brake and keep its pressed during 30 with. If the pedal height does not change, the vacuum amplifier of brakes works normally.

Otherwise, check up the unilateral vacuum valve or a vacuum hose on absence of damages and check up reliability of their fastenings.