Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
- Brake system
   Specifications
   Check of the vacuum amplifier of brakes
   Check of the unilateral vacuum valve
   Prorolling of hydraulic system of a drive of brakes
   Adjustment of a course of a lay brake
   Brake pedal
   The vacuum amplifier of brakes
   The main brake cylinder
   Replacement of lobbies brake pads
   Support of a forward brake
   Back disk brakes
   Back drum-type brakes
   Replacement of the working brake cylinder
   Pressure regulator
   Brake tubes and hoses
   Lay brake
   Antiblocking system of brakes (ABS)
   Hydraulic block HECU
   The gauge of frequency of rotation of a wheel
   Prorolling of hydraulic system of a drive of brakes with scanner use
   Search and elimination of malfunctions
Body
Air central air
The electric equipment
Electric schemes









Brake pedal

Removal

 PERFORMANCE ORDER

    Remove the switch of stoplights.
    Remove pin and remove a pin with a head and an aperture under pin.
    Turn away a nut with a fillet of fastening of an arm of a pedal of a brake. Remove knot of a pedal of a brake.

Check

 PERFORMANCE ORDER

    Check up the plug on absence of deterioration. Check up a brake pedal on absence of curvatures. Check up a spring of return of a pedal of a brake on absence of damages.
    Check up the switch of stoplights
    1) an Ohmmeter connected to plugs of the switch of stoplights, check up its conductivity.
    2) By pressing плунжера conductivity should be absent and appear at clearing плунжера.

Installation

Installation is spent to sequences, return to removal.

Be convinced that have established pin on a pin with a head and an aperture under pin draughts of a pedal of a brake.


 PERFORMANCE ORDER

    Establish knot of a pedal of a brake and fix nuts with a fillet and a bolt. The inhaling moment: 13–16 Nm.
    Check up and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake. Establish the switch of stoplights.