Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of a liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   The switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of work of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of teamwork of an automatic transmission and the engine for the motionless car (F4A42)
   Pressure check трансмиссионной liquids (F4A42)
   Pressure check трансмиссионной liquids (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial backlash of a reactionary brake (F4A42)
   Adjustment of an axial backlash of a brake of the second transfer (F4A42)
   Adjustment of an axial backlash of a brake of low transfer and backing transfer (F4A42)
   Adjustment of an axial backlash of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of automatic transmission F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of automatic transmission F4A43
   Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear (А4АF3)
   Pressure adjustment in a highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of transmission F4A42
   Removal and installation of transmission A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes









Testing of teamwork of an automatic transmission and the engine for the motionless car (F4A42)

Testing is carried out to define the maximum frequency of rotation of the engine when the selector lever is established in positions D or R, and also to check up action of the hydrotransformer, a starter and unilateral муфты, and also characteristics of couplings and brakes.

At performance of testing nobody should stand ahead and behind the car.


 PERFORMANCE ORDER

    Before testing check up levels of all operational liquids and, if necessary, finish them to the normal.
    • Level трансмиссионной liquids should be about a label of "NOTES" on the index.
    • the Temperature трансмиссионной liquids should be in limits 80–100С.
    • Temperature of a cooling liquid 80–100C.
    Establish клиновые an emphasis under back wheels. Tighten a lay brake and press a brake pedal. Start the engine. Move the selector lever to a position D. The left foot press against the stop a brake pedal, and the right foot smoothly press an accelerator pedal. When frequency of rotation of a cranked shaft of the engine does not increase any more, read indications of a tachometre and release an accelerator pedal.

  1. For an exception of damage of a transmission testing spend during 8 with.
  2. If it is necessary to spend more than one testing at the working engine move the selector lever to a position N and leave the engine to work on frequency of rotation of idling before cooling трансмиссионной liquids. Engine work on frequency of rotation of idling cools трансмиссионную a liquid and prevents deterioration of its properties.

Frequency of rotation of a cranked shaft of the engine at testing of teamwork of an automatic transmission and the engine for the motionless car (stall test):
F4A42: 2000–2900 mines–1
А4AF3: 2200–2800 mines–1

  1. Similarly hold testing in position R the selector lever.

Frequency of rotation of a cranked shaft of the engine at testing of teamwork of automatic transmission F4A42 and the engine on the motionless car (stall test): 2000–2900 mines–1

The analysis of results of testing

 PERFORMANCE ORDER

    Frequency of rotation of a cranked shaft of the engine above the specification in a position D and R.
    • Low pressure in the pipeline.
    • Proskalzyvanie of brake tapes on low transfer and backing transfer. Frequency of rotation of a cranked shaft of the engine above the specification only in a position D.
    • Proskalzyvanie of coupling of lowering transfer. If frequency of rotation of a cranked shaft of the engine above the specification only in a position R.
    • Proskalzyvanie of coupling of a backing. If frequency of rotation of a cranked shaft of the engine below the specification in a position D and R.
    • hydrotransformer Damage.
    • Insufficient capacity of the engine