Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of a liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   The switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of work of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of teamwork of an automatic transmission and the engine for the motionless car (F4A42)
   Pressure check трансмиссионной liquids (F4A42)
   Pressure check трансмиссионной liquids (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial backlash of a reactionary brake (F4A42)
   Adjustment of an axial backlash of a brake of the second transfer (F4A42)
   Adjustment of an axial backlash of a brake of low transfer and backing transfer (F4A42)
   Adjustment of an axial backlash of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of automatic transmission F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of automatic transmission F4A43
   Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear (А4АF3)
   Pressure adjustment in a highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of transmission F4A42
   Removal and installation of transmission A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes









Removal and installation of transmission A4AF3

Removal

 PERFORMANCE ORDER

    Turn out a drain stopper and merge in suitable capacity трансмиссионное oil from a transmission.
    Remove the air filter.
    Disconnect a socket from the switch of ranges of a transmission.
    Disconnect a solenoidal socket and a socket from the gauge of temperature of oil.
    Remove a management cable.
    Remove a clip of a cable of management.
    Disconnect a hose from an oil radiator.
    Disconnect a socket from the speedometer gauge.
    Remove forward wheels.
    Remove a starter.
    Turn out the top bolts of fastening of a transmission.
    Remove supports of forward brakes.
    Disconnect from a rotary fist the spherical hinge of a tip of steering draught.
    Remove the gauge of speed and turn out bolts of fastening of a forward rack to a rotary fist.
    Remove a power shaft and turn away a nut of fastening of the left nave.
    The special adaptation support the engine so that the engine weight was perceived by the adaptation.
    Remove a transmission arm.
      Turn out a bolt of fastening of a support.

b. Turn out (left) bolt from outside bodies.

c. Turn out (top) bolt from outside bodies.

    Remove a forward roller stopper from the bottom frame.
    Remove a back roller stopper from the bottom frame.
    Uncover a bell casing.
    Turn out bolts and remove a plate closing the hydrotransformer.
    Turn out bolts of fastening of a plate to the block of cylinders.
    Establish a jack under the bottom frame.
    Turn out the bottom bolts of fastening of a transmission.
    Remove the forward muffler.
    Turn out bolts of fastening of the bottom frame.
    Establish a jack under a transmission.
    Turn out the bottom bolts of fastening of a transmission.
    Remove a transmission.

Installation

 PERFORMANCE ORDER

    Establish on a forward part of a transmission the hydrotransformer and establish a transmission to the engine.

If the hydrotransformer to establish at first on the engine, at transmission installation the sealing ring of a transmission can be damaged.

    Establish a cable of management of a transmission and adjust as follows.
      Move the lever of the selector and the switch of ranges of a transmission to position N and establish a cable of management of a transmission. At connection of a cable of management to an establishing arm of a transmission, establish a clip so that it has contacted with a management cable. Adjusting nut choose any free wheeling in a cable of management and check up that the selector lever moves smoothly. Check up that the management cable is adjusted correctly.