Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of a liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   The switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of work of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of teamwork of an automatic transmission and the engine for the motionless car (F4A42)
   Pressure check трансмиссионной liquids (F4A42)
   Pressure check трансмиссионной liquids (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial backlash of a reactionary brake (F4A42)
   Adjustment of an axial backlash of a brake of the second transfer (F4A42)
   Adjustment of an axial backlash of a brake of low transfer and backing transfer (F4A42)
   Adjustment of an axial backlash of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of automatic transmission F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of automatic transmission F4A43
   Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear (А4АF3)
   Pressure adjustment in a highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of transmission F4A42
   Removal and installation of transmission A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes


order cialis 20mg online








Diagnostics function

 PERFORMANCE ORDER

    Connect scanner HI-SCAN to a diagnostic socket. Consider codes of malfunctions.
    In memory (RAM) 8 codes of malfunctions in sequence of their occurrence can be written down.
  • The same diagnostic code of malfunction cannot be written down so much time, how many malfunction there is in one and too time.
  • If there are malfunctions after in memory 8 codes of malfunctions are written down, codes of malfunctions will be erased, since codes which have been written down first of all.
    If the system is activated also a transmission blocked on the third transfer, in RAM the diagnostic code of malfunction will be written down. In memory three diagnostic codes of malfunction in this case can be written down. Cancellation will occur if, to a transmission blocked on the third transfer, the ignition key will turn in position OFF, and the diagnostic code of malfunction is written down in RAM. Storing of codes of diagnostics.
    • To 8 elements of the diagnosis and 3 points it can be remembered.
    • If the store capacity is exceeded the diagnosis and points will be rewritten since codes which have been written down first of all.
    • the Code is not remembered some times. Removal of codes of diagnostics.
    1) Automatic removal
    All codes of diagnostics leave from memory through 200 times after temperature ATF досягает 50C after storing of the freshest code of diagnostics.
    2) Compulsory removal.
    Remembered codes of diagnostics can be removed, using scanner HI-SCAN if following conditions are satisfied:
    • ignition is included;
    • there are no impulses from the gauge of an angle of rotation of a cranked shaft;
    • there are no impulses from the gauge of frequency of rotation of a conducted shaft;
    • there are no impulses from the gauge of speed of the car;
    • function of malfunctions does not work.