Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of a liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   The switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of work of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of teamwork of an automatic transmission and the engine for the motionless car (F4A42)
   Pressure check трансмиссионной liquids (F4A42)
   Pressure check трансмиссионной liquids (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial backlash of a reactionary brake (F4A42)
   Adjustment of an axial backlash of a brake of the second transfer (F4A42)
   Adjustment of an axial backlash of a brake of low transfer and backing transfer (F4A42)
   Adjustment of an axial backlash of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of automatic transmission F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of automatic transmission F4A43
   Adjustment of the servo-driver of compulsory inclusion of a hill-climbing gear (А4АF3)
   Pressure adjustment in a highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of transmission F4A42
   Removal and installation of transmission A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










Pressure adjustment in a highway (А4АF3)

 PERFORMANCE ORDER

    Merge трансмиссионную a liquid from an automatic transmission.
    Remove the oil pallet.
    Remove the oil filter.
    Remove the temperature gauge трансмиссионной liquids.
    Press a clamp and extend a sealing ring of the electromagnetic valve.
    Remove valve knot, thus be careful, that it has not fallen.
    Turn the adjusting screw of the distributor so that pressure in a highway has reached demanded value. Screw rotation clockwise leads to reduction of pressure and, on the contrary, counter-clockwise – to increase. Nominal pressure: 860–900 кПа. Pressure change at screw turn on 1 turn: 38 кПа.
    Check up that the sealing ring is established on the top part of the case of the valve. Replace a sealing ring of the electromagnetic valve.
    Establish the valve case in картер and insert a socket of the electromagnetic valve in картер. Be convinced that the gear part of a socket is established how is shown in drawing.
    Tighten bolts of fastening of the case the moment of an inhaling 10–12 Nm.
    Establish the oil filter.
    Establish a new lining of the oil pallet and the oil pallet. Fill in demanded quantity трансмиссионной liquids in an automatic transmission. Check up pressure in a highway.