Liquid replacement in an automatic transmission
If liquid replacement in the hydrotransformer is spent, also replace a liquid in a transmission. If liquid replacement in the hydrotransformer is not spent, replace a liquid in a transmission as follows.
|
|
Disconnect a hose which connects a transmission and an oil radiator (from outside a radiator). Turn out a drain stopper from the basis картера transmissions and merge a liquid.
Establish a drain stopper with a lining and tighten the moment resulted in the specification. The inhaling moment: 32 Nm.
Fill in necessary quantity of a demanded liquid.
|
|
Stop liquid pouring if the demanded quantity cannot be filled in in a transmission. |
If it has been filled in большее quantity трансмиссионной liquids repeat procedure according to step 1.
Connect a hose which has been disconnected in a step (1) and reliably insert щуп for level measurement.
Start the engine and leave it to work within 1–2 minutes in an idling mode.
At the working engine move the lever of the selector from position N to all positions and back in position N.
Make a trip before warming up of a transmission to temperature 70–80C. Park the car on an equal horizontal surface. Check up level of a liquid which should be between labels HOT. If necessary, add necessary quantity of a demanded liquid.
|
|
Reliably insert щуп for level measurement трансмиссионной liquids.
|
|
|
|