Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
- Mechanical transmission
   Specifications
   Check of level of oil
   Replacement трансмиссионного oils
   Replacement of an oil sealing ring of a power shaft
   Removal and transmission installation
   The gear change mechanism
   Search and elimination of malfunctions
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










Removal and transmission installation


Removal


 PERFORMANCE ORDER

    Disconnect, first of all, a wire from the negative plug of the storage battery, then – from positive.
    Remove the storage battery and a battery support.
    Remove the air filter.
      Uncover the air filter.

b. Remove the case of the air filter.

    Disconnect a socket of the switch of light of a backing.
    Remove an arm and disconnect sockets from the gauge of an angle of rotation of a cranked shaft (CKP), the gauge of oxygen and the gauge of pressure of oil.
    Remove a cable of a drive of a speedometer.
    Turn out a bolt of fastening of the working cylinder of coupling.
    Remove pin fastenings of a cable of a gear change.
    Remove pin fastenings of a cable of a choice of transfers.
    Remove a clip of fastening of a cable of a gear change.
    Remove a clip of fastening of a cable of a choice of transfers.
    Disconnect propeller the hinge from a shaft of a steering column.
    Disconnect a hose of the oil pump of the amplifier of a steering.

Be cautious, as at a hose detachment the liquid will follow.

    Remove a clip and disconnect a returnable hose of the pump of the amplifier of a steering.
    Turn out the top bolts of fastening of a transmission.
    Turn out bolts and remove a starter.
    The special adaptation 09200–38001 support the engine so that the engine weight was perceived by the adaptation.
    Remove forward wheels and supports of forward brakes.
    Disconnect from a rotary fist the spherical hinge of a tip of steering draught.
    Remove the gauge of speed and turn out bolts of fastening of a forward rack to a rotary fist.
    Turn out a drain stopper and merge oil from a transmission.
    Remove a transmission arm.
      a. Turn out a bolt of fastening of a support.

b. Turn out (top) bolt from outside bodies.

c. Turn out (lateral) bolt from outside bodies.

d. Turn out a lateral assembly bolt of fastening of a transmission.

    Remove a forward roller stopper.
      Turn out a bolt of fastening of a support.

b. Turn out (lateral) bolt of fastening of a stopper.

c. Turn out (bottom) bolt of fastening of a stopper.

    Remove a back roller stopper.
      Turn out a bolt of fastening of a support.

b. Turn out a bolt of fastening of a stopper.

    Remove a power shaft.
    Remove the muffler.
    Turn out bolts of fastening of the bottom frame.
    Support a transmission a jack.
    Turn out the bottom bolts of fastening of a transmission.
    Remove a transmission.

At transmission removal be convinced that the jack supports a transmission on the big area.

Installation

Installation is spent to sequences, return to removal.