Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
- Coupling
Specifications
Adjustment of a pedal of coupling
Prorolling of hydraulic system of a drive of coupling
Conducted and press coupling disks
The main cylinder of coupling
Coupling pedal
The working cylinder of coupling
Search and elimination of malfunctions
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Prorolling of hydraulic system of a drive of coupling
Any hydraulic system works normally if air is removed from it.
|
|
The liquid used in a hydraulic drive, dissolves a paint and plastic, therefore at liquid hit on a paint and varnish covering of the car wash out its considerable quantity of water.
During air removal add only the pure liquid recommended by the manufacturer. |
Recommended liquid: SAE J1703 (DOT3).
|
|
On the cylinder of deenergizing of coupling loosen the the union of prorolling also attach to it a hose. Arrange other end of a hose in glass capacity of sufficient volume.
Slowly press a coupling pedal.
At the pressed pedal of coupling loosen the the union of prorolling also let the air out from hydraulic system. Tighten the union of prorolling and release a coupling pedal.
Repeat operations until there will be a brake liquid without air vials.
|
|
|
|
Fast repeated pressing of a pedal of coupling in the field of B–C can lead to an exit of a pusher from the case of the cylinder of coupling during prorolling. To press a coupling pedal it is necessary only after its return to the top position (). |
|
|
|
|
|