Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
- Coupling
   Adjustment of a pedal of coupling
   Prorolling of hydraulic system of a drive of coupling
   Conducted and press coupling disks
   The main cylinder of coupling
   Coupling pedal
   The working cylinder of coupling
   Search and elimination of malfunctions
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Brake system
Air central air
The electric equipment
Electric schemes

Coupling pedal



    Remove pin, a washer and a pin with a head and an aperture under pin. Turn out a bolt of fastening of a pedal of coupling.



    Check up the lever of a pedal and the plug on absence of deterioration. Check up a coupling pedal on absence of a bend and deformation. Check up a returnable spring on absence of damages and elasticity loss. Check up a pillow of a pedal of coupling on absence of damages and deterioration.
    Check up conductivity between contacts of the switch of blocking of the lock of ignition.



    Establish details in sequence, return to removal.
    Before installation grease the plug, a pin, a washer and a pin with a head and an aperture under pin.
    Establish a pusher on a coupling pedal.
    Adjust length of a pusher.