Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
- Coupling
   Specifications
   Adjustment of a pedal of coupling
   Prorolling of hydraulic system of a drive of coupling
   Conducted and press coupling disks
   The main cylinder of coupling
   Coupling pedal
   The working cylinder of coupling
   Search and elimination of malfunctions
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










The main cylinder of coupling

Dismantling

 PERFORMANCE ORDER

    Remove a fastening bandage пополнительного a tank, a tank and a cover. Remove a lock ring of the piston. Take a pusher and the piston.

Do not damage a pusher and a surface of the main cylinder of the coupling, contacting to the piston.

Check

 PERFORMANCE ORDER

    Clear the dismantled details in solvent and blow all details and channels the compressed air. Check up an internal part of the case of the cylinder on absence of a rust, dot corrosion or development. Check up a piston cuff on absence of deterioration. Check up the piston on absence of a rust, dot corrosion or development. Check up a tube of a hydraulic drive of coupling on absence of damages. Measure internal diameter of the main cylinder of coupling.

Measurement of internal diameter of the main cylinder of coupling spend in three sections (in the basis, the centre and top) in two perpendicular directions.

    If the backlash between the piston and the cylinder exceeds admissible value, replace the main cylinder and-or the piston in gathering. A backlash: 0,15 mm.

Assemblage

 PERFORMANCE ORDER

    Before assemblage grease with a liquid for coupling the piston and diameter расточки the cylinder. A liquid: brake liquid DOT 3 or DOT 4. Establish the piston in gathering. Establish a lock ring of the piston.
    Establish a pusher.
    Establish a fastening tape пополнительного a tank, a tank and a cover.