Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
- Coupling
   Specifications
   Adjustment of a pedal of coupling
   Prorolling of hydraulic system of a drive of coupling
   Conducted and press coupling disks
   The main cylinder of coupling
   Coupling pedal
   The working cylinder of coupling
   Search and elimination of malfunctions
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










Adjustment of a pedal of coupling

 PERFORMANCE ORDER

    Measure distance from a forward surface of a pedal to a carpet covering. Height of installation of a pedal of coupling (A): 166,9 mm.
    If the height of installation of a pedal of coupling does not correspond to demanded value, adjust it as follows:
      loosen the a counternut and, rotating a bolt, adjust a free wheeling of a pedal of coupling, then tighten a counternut;

After adjustment tighten a bolt while it will not reach a pedal emphasis, then tighten a counternut.

b. Rotate a pusher before achievement of the demanded height of installation of a pedal, then tighten a counternut.

At adjustment of height of installation or a free wheeling of a pedal of coupling be cautious not to move a pusher to the main cylinder of coupling.

    Hand press a pedal of coupling before occurrence of notable resistance and measure free wheeling size.
    Free wheeling of a pedal of coupling (): 6–13 mm.