Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
- The electric equipment
   Specifications
   Gymnastics system
   The generator
   Power failure check on a wire connecting the storage battery with the generator
   Check of the current developed by the generator
   Check of developed pressure
   The generator of petrol engines
   The generator of the diesel engine
   The storage battery
   Start system
   Starter of petrol engines
   Starter of the diesel engine
   Safety locks
   The block of safety locks
   The multipurpose switch
   Sound signal
   Combination of devices
   The switch of position of a lay brake
   Screen wiper and стеклоомыватель a windscreen
   Screen wiper of back glass
   Headlights and forward indexes of turn
   Forward antifog headlights and turn repeaters
   The back combined lantern
   The top stoplight
   Lantern of illumination of licence plate
   The ceiling fixture (with the hatch)
   The ceiling fixture (without the hatch)
   Lamp of illumination of salon
   Check of the relay of headlights
   Radio receiver
   Heater of back glass
   Safety pillows (SRS)
   Seat belts
   Search and elimination of malfunctions
   Specification for adjustments and the control
Electric schemes










Start system


The start system includes the storage battery, a starter, the traction relay, the lock of ignition blocking the switch (only on cars with an automatic transmission) and wires.

At starter inclusion through a winding of the traction relay of a starter the current from the storage battery starts to proceed, the relay anchor is involved also relay contacts become isolated. Simultaneously the relay anchor through the lever moves обгонную муфту with a gear wheel. The nave обгонной муфты turns on screw шлицах a starter shaft together with a gear wheel that facilitates its input in gearing with a gear wreath of a flywheel. Through the closed contacts of the traction relay there is a current feeding windings статора both anchors, and the starter anchor starts to rotate together with a nave and обгонной муфтой.

After the engine starts to work, frequency of rotation of a gear wheel exceeds frequency of rotation of an anchor of a starter, обгонная муфта the twisting moment is freely turned also not transferred from a flywheel to a starter shaft. After release the ignition key the feed circuit of a winding of the traction relay is disconnected, the anchor of the traction relay is wrung out by a spring in a starting position, relay contacts are disconnected also a drive gear wheel leaves gearing with a gear wreath of a flywheel.