Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
- Steering
Specifications
Check of a free wheeling of a steering wheel
Check of an angle of rotation of forward wheels
Check of a twisting moment of a pin of the spherical hinge of a tip of steering draught
Check of effort of turn of a steering wheel
Check of return of a steering wheel in a starting position
Check of a tension of a belt of a drive of the pump of the hydraulic booster of a wheel
Check of level of a liquid
Liquid replacement in a hydraulic drive of the hydraulic booster of a wheel
Prorolling of hydraulic system of the amplifier of a steering
Check of pressure of a liquid in hydraulic system
Steering column / a steering shaft
Removal and installation of the lock of a steering column
Steering transfer
Hoses of the amplifier of a steering
Filling with a liquid of the mechanism of the amplifier of a steering
The pump of the amplifier of a steering
Search and elimination of malfunctions of a steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Check of level of a liquid
|
|
Establish the car on an equal horizontal platform.
Start the engine and warm up a liquid of the amplifier of a steering to temperature 50~60C for what turn a steering wheel from an emphasis against the stop some times.
At engine work idling turn a steering wheel from an emphasis against the stop some times.
Check up that in a tank of the amplifier of a steering there is no foaming.
Switch off the engine and check up a difference of levels of a liquid in a tank at the working and switched off engine.
|
|
- If a difference of levels of a liquid more than 5 mm, remove air from a drive of the amplifier of a steering.
- If liquid level suddenly raises after engine deenergizing, the further prorolling of a hydraulic drive of the amplifier of a steering is not required.
- Incomplete prorolling of a hydraulic drive of the amplifier of a steering leads to occurrence of the noise published by the pump and reduces durability of work of the pump.
|
|
|
|
|