|
Check up a belt tension, having pressed on it effort 98 Н (10 kg) in a place located on identical removal from pulleys, and measure a belt deflection. A belt deflection: 6–9 mm.
|
|
If the belt tension does not correspond demanded, adjust it as follows.
1) Oslabte a bolt of adjustment of a tension of a belt of a drive of the pump of the hydraulic booster of a wheel.
|
|
2) the Mount inserted between an arm and the pump, adjust a belt tension so that the belt deflection was in admissible limits.
|
3) Tighten a bolt of adjustment of a tension of a belt of a drive of the pump of the hydraulic booster of a wheel. 4) Check up tension of a belt and, if necessary, repeat adjustment.
|
Turn a cranked shaft of the engine and repeatedly check up a belt tension. |
|
|