Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a twisting moment of a pin of the spherical hinge of a tip of steering draught
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the hydraulic booster of a wheel
   Check of level of a liquid
   Liquid replacement in a hydraulic drive of the hydraulic booster of a wheel
   Prorolling of hydraulic system of the amplifier of a steering
   Check of pressure of a liquid in hydraulic system
   Steering column / a steering shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with a liquid of the mechanism of the amplifier of a steering
   The pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
Brake system
Body
Air central air
The electric equipment
Electric schemes









Hoses of the amplifier of a steering


At pipe and hose connection be convinced that have combined labels of white colour on each element.

Pressure head hose and pipe

 PERFORMANCE ORDER

    Remove воздухозаборный a branch pipe.
    Remove a clip of fastening of a pressure head hose.
    Disconnect фитинг pipes from outside steering transfer. Lift the car and remove a clip, securing the pressure head and returnable tubes.
    Lower the car and remove a connector (24 mm).
    Remove a pressure head hose and a tube.
    Installation is spent to sequences, return to removal.
  1. Establish a pressure head hose and a tube so that they have not been overwound and did not concern mobile elements of the car.
  2. Pump over a hydraulic drive of the amplifier of a steering.

Returnable hose and pipe

 PERFORMANCE ORDER

    Remove from an arm a tank of the amplifier of a steering.
    Remove clips of fastening of a returnable pipe and a hose.
    Remove воздухозаборный a branch pipe.
    Disconnect a pressure head pipe and фитинг a returnable pipe from steering transfer.
    Lift the car and remove a clip, securing the pressure head and returnable tubes.
    Lower the car and remove a clip of fastening of a returnable tube and a hose.
    Installation is spent to sequences, return to removal.
  1. Establish a returnable hose and a tube so that they have not been overwound and did not concern mobile elements of the car.
  2. Pump over a hydraulic drive of the amplifier of a steering.

Check

 PERFORMANCE ORDER

    Manually braiding a hose, check up it on absence of damages or cracks. Be convinced that there is no contact between a hose and other elements of the car.