|
|
The special tool disconnect a tip of steering draught and the hinge.
|
Some times shake here and there a pin of the spherical hinge of a tip of steering draught.
|
|
Screw on a pin of the spherical hinge two nuts and measure a twisting moment. A twisting moment: 0,5–2,5 Nm.
|
If the twisting moment exceeds admissible values, replace a tip of steering draught.
If the twisting moment considerably below admissible value, the spherical hinge can repeatedly be used, if it is not got jammed and has no excessive люфта.
|
|