Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
- Fuel system
    Fuel system of petrol engines
   - Fuel system of diesel engines
      The general data on injection system Common Rail
      Characteristics of system of injection
      Control injection of fuel
      The main injection of fuel
      Additional injection of fuel
      Reduction of toxicity of the fulfilled gases
      Fuel system Common Rail
      Control system EDC
      Management of a maximum quantity of air arriving in the engine
      The active shock-absorber reducing fluctuations of frequency of rotation of a cranked shaft of the engine
      Engine deenergizing
      Candles накаливания
      Removal and atomizer installation
      Installation of the fuel pump of a high pressure
      Measuring instrument of the expense of air (Air flow sensor – AFS)
      The gauge of temperature of a cooling liquid (ECT)
      The gauge of position of a camshaft (CMP)
      The gauge of an angle of rotation of a cranked shaft
      The gauge of pressure of fuel in the high pressure accumulator (RPS)
      The gauge of temperature of fuel (FTS)
      The valve of adjustment of pressure
      Search and elimination of malfunctions
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Brake system
Air central air
The electric equipment
Electric schemes

Installation of the fuel pump of a high pressure

  • The fuel system works at high pressures (1350 bar).
  • Do not spend any works on fuel system at the working engine or within 30 seconds after its stop.
  • Always observe safety measures.
  • At work provide absolute cleanliness.


    Insert муфту into the pump. Apply a thin film lubricant on a sealing ring and establish the fuel pump on a head of cylinders, simultaneously turning the pump for gearing of a shaft of the pump with a camshaft. Put on a carving of bolts of fastening of the fuel pump the blocking structure excluding their spontaneous отворачивание. Screw bolts with washers and tighten their demanded moment. The inhaling moment: 13–18 Nm.
    Establish the high pressure pipeline. The inhaling moment: 18–23 Nm.