Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
- The diesel engine of 2,0 l
   Compression check
   Adjustment of a tension of a gear belt
   Gear belt
   Cover of a head of cylinders and a stopper
   Balancing shaft
   Repair of a head of cylinders
   Engine support
   The elements of support which are subject to check
   The block of cylinders
   Removal and engine and transmission installation
   Cranked shaft
   The piston
   Cooler of inflated air
   The air filter (ACL)
   System of release of the fulfilled gases
   Search and elimination of malfunctions
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Brake system
Air central air
The electric equipment
Electric schemes

Adjustment of a tension of a gear belt


    Check up a condition поликлинового a belt and its arrangement on pulleys.
    Establish a belt on engine pulleys in a following order: a generator Pulley => the Pulley of the pump of the amplifier of a steering => the Intermediate pulley => the Pulley of the compressor of the conditioner => the Pulley of a cranked shaft
    At belt installation on pulleys be convinced that it is correctly established in pulley flutes.
  1. Check up correctness of an arrangement of edges поликлинового a belt in flutes of pulleys.
  2. If at work поликлиновой the belt publishes extraneous noise, check up a belt on absence of deterioration and damages, and also working surfaces of pulleys.
    The label of the mechanism of a tension should be between position *. Otherwise replace a belt.