Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
- The diesel engine of 2,0 l
Specifications
Compression check
Adjustment of a tension of a gear belt
Gear belt
Cover of a head of cylinders and a stopper
Camshaft
Balancing shaft
Repair of a head of cylinders
Engine support
The elements of support which are subject to check
The block of cylinders
Removal and engine and transmission installation
Cranked shaft
The piston
Турбокомпрессор
Cooler of inflated air
The air filter (ACL)
System of release of the fulfilled gases
Search and elimination of malfunctions
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Removal and engine and transmission installation
Removal
|
|
Disconnect a wire of "weight" and remove the storage battery.
|
Remove from the engine a casing.
Disconnect hoses from an oil radiator of a transmission.
|
Disconnect a socket from the valve рециркуляции fulfilled gases EGR and vacuum hoses.
|
Disconnect electric sockets from engine elements (fuel atomizers, gauge VMT of the first cylinder etc.).
|
Disconnect electric sockets from the generator and a starter.
|
Merge cooling liquid.
|
On the car with an automatic transmission disconnect hoses of an oil radiator of a transmission.
|
|
Mark hoses before their detachment not to mix them at repeated joining. |
|
Be careful, that has not flowed out трансмиссионная a liquid from hoses. For an exception of hit of a dirt close the ends of hoses stoppers. |
|
Disconnect the top and bottom hoses from a radiator and remove a radiator.
|
Disconnect from the engine a wire of connection with "weight".
|
Disconnect from the engine hoses of giving and fuel return.
|
|
Disconnect a vacuum hose from the vacuum amplifier of brakes.
|
|
Disconnect hoses of system the coolings going to a heater.
|
|
Disconnect from a transmission a cable of a drive of a speedometer.
|
|
On the car with a mechanical transmission disconnect a cable of coupling from картера transmissions.
|
Disconnect from a transmission a wire of connection with "weight".
|
On the car with an automatic transmission disconnect a cable of management of a transmission.
|
|
On the car with an automatic transmission disconnect sockets from the switch of blocking and the electromagnetic valve.
|
On the car with a mechanical transmission disconnect draughts of a choice and a gear change.
|
Disconnect the filter and a returnable hose from the pump of the hydraulic booster of a wheel.
|
|
Disconnect tubes from the conditioner compressor.
|
|
In a motor compartment remove a dustproof cover and turn out a bolt of fastening of the universal hinge of a steering shaft to steering transfer.
|
|
For correct repeated connection note mutual position of the hinge of a steering shaft and steering transfer. |
Lift the car and remove forward wheels.
|
Turn out bolts, remove a support and a soft wire fix it on a rack of a forward suspension bracket.
|
|
Turn out bolts and disconnect the bottom part of a rotary fist from a rack.
|
|
Disconnect a forward exhaust pipe from a final collector.
|
|
Fix captures of the load-lifting mechanism for eyes of the engine and lift so that to unload support from engine weight.
|
Support a transmission the hydraulic lift and turn out bolts and fastening nuts to подмоторной to a frame.
|
Check up that all electric sockets, hoses, tubes and plaits of wires are disconnected from the engine. |
|
Remove an engine and transmission support.
|
|
Turn out bolts and fastening nuts подмоторной frames.
|
|
Inclining a transmission, lower downwards and remove the engine together with a transmission from the car.
|
|
|
|
|