Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
- The diesel engine of 2,0 l
   Compression check
   Adjustment of a tension of a gear belt
   Gear belt
   Cover of a head of cylinders and a stopper
   Balancing shaft
   Repair of a head of cylinders
   Engine support
   The elements of support which are subject to check
   The block of cylinders
   Removal and engine and transmission installation
   Cranked shaft
   The piston
   Cooler of inflated air
   The air filter (ACL)
   System of release of the fulfilled gases
   Search and elimination of malfunctions
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Brake system
Air central air
The electric equipment
Electric schemes

The air filter (ACL)



    Disconnect an electric socket from the gauge of a stream of air. Remove the inlet air branch pipe connected to the air filter. Turn out three bolts of fastening of an arm of the air filter.
    Remove the air filter.
    Remove from an air branch pipe the gauge of a stream of air.

Do not pull a wire of the gauge of a stream of air.



    Check up the case of the air filter and a cover on absence of deformations, corrosion or damages. Check up an air line on absence of damages.
    Check up filtering element of the air filter on absence of excessive pollution, damage or hit on it oils. For clearing of a filtering element use compressed air, submitting it from the interior of a filtering element. If necessary, replace filtering element of the air filter.


Installation is spent to sequences, return to removal.