Hyundai Elantra
- Petrol engines 1,6, 1,8 and 2,0 l
Compression check
Gear belt
Adjustment of a tension of a gear belt
Tension adjustment поликлинового a belt
Adjustment of a tension of a belt of a drive of the generator
Camshafts
Check and adjustment of backlashes of valves on engines of 1,8 and 2,0 l (MLA)
Hydraulic jacks of backlashes of valves of the engine of 1,6 l
Installation of a cover of a head of cylinders
Directing to a chain
Chain
Installation of camshafts
The mechanism of change of the moment of opening and closing of valves (CVVT) on engines of 1,8 and 2,0 l
Repair of a head of cylinders
Engine support
Removal and engine and transmission installation
The block of cylinders
Cranked shaft
Flywheel
The piston
The air filter (ACL)
Final collector
Inlet collector
System of release of the fulfilled gases
Search and elimination of malfunctions
The diesel engine of 2,0 l
Greasing system
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Installation of a cover of a head of cylinders
|
|
Remove the rests of a lining from a cover of a head of cylinders and a head of cylinders.
Put on an interfaced surface of a cover of a head of cylinders a thin layer of hermetic (Loctite № 5999).
|
|
Establish a cover of a head of cylinders and fix bolts, having tightened their demanded moment. The inhaling moment: 8–10 Nm.
|
|
|
Connect an accelerator cable.
|
Connect a ventilation hose картера.
Connect high-voltage wires to spark plugs
Establish the top casing of a gear belt and fix its four bolts.
Establish the central cover and fix its five bolts. The inhaling moment: 2,5–3,5 Nm.
|
|
Establish a cover маслоналивной mouths.
|
Establish a casing on the engine.
|
|
|
|