Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
- Fuel system
- Fuel system of petrol engines
Specifications
Search and elimination of malfunctions
Check of frequency of rotation of idling
Check of the fuel pump
Replacement of the fuel filter
Replacement of the terminator of overflow (the double-thread valve)
Replacement of the gauge of level of fuel
Checks of system of injection MFI
Control lamp of malfunctions (MIL)
Diagnostic codes of malfunctions
Gauges
Fuel atomizers
The modulator of management of frequency of rotation of a cranked shaft of the engine idling (ISC)
The gauge of speed of the car (VSS)
The detonation gauge (KS)
The ignition lock (ST) and the switch of ranges (TR) in cars with an automatic transmission
The ignition lock (ST) in cars with a mechanical transmission
The engine management block
The switch and the relay of a central air of air
The electromagnetic valve of clearing of the canister of system of catching of steams of fuel (EVAP)
The main relay MFI
The ignition coil
The fuel pump
The gauge of acceleration APS
The oil valve (OCV)
Fuel highway and atomizers
Throttle knot
Fuel tank
Pedal and accelerator cable
Fuel system of diesel engines
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Fuel tank
Removal
|
|
- Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of a workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke.
- Before removal of a fuel tank, merge from it fuel. Clear a fuel tank of fuel steams.
- Uncover with топливоналивной mouths of a fuel tank to level pressure in a tank with atmospheric pressure.
|
|
|
|
|
Remove a pillow of back sitting and disconnect a socket of the fuel pump.
|
Start up the engine and leave it to work till the moment of the stop connected with absence of fuel in a distributive fuel highway. As a result of the executed actions pressure in fuel system is removed.
|
|
|
|
For an exception разбрызгивания fuel close a place of separation of fuel system pure rags and, being careful, smoothly separate pipelines. |
|
|
|
Disconnect a wire of "weight" from the storage battery.
|
Disconnect the top pressure head hose from the party of an exit of the fuel filter and a wire of removal of a static electricity.
Lift the car.
Disconnect a hose from топливоналивной mouths and a hose of alignment of pressure of steams of fuel.
|
|
Support a fuel tank a jack.
|
Turn on self-locking nuts and remove tapes of fastening of a fuel tank.
|
|
Close all opened apertures of a fuel tank to exclude an exit from a tank of steams of fuel. Even in an empty fuel tank there are steams of fuel which are explosive, therefore be careful. Provide normal ventilation of a workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke. As soon as possible clear a fuel tank of fuel steams. |
|
|
Check
|
|
Check up hoses and pipes on absence of cracks, an excess, deformation, ageing and a contamination.
Check up functioning of a cover of a jellied mouth of a fuel tank.
Clear a tank and check up it on presence of traces of a rust, damages and cracks. Damaged or treated it is necessary for corrosion action to replace a fuel tank.
Check up an internal surface of a fuel tank on presence of pollution.
Check up the fuel filter on absence of a contamination or damages.
Check up working capacity of the terminator of overflow (the double-thread valve).
|
|
Check up working capacity of the double-thread valve, blowing it from two parties.
|
|
|
Installation
|
|
Establish a fuel tank and fix its tapes.
|
|
Connect compensating hose to a mouth of a fuel tank, having pulled it approximately over 40 mm.
|
|
|
At hose connection наполнителя it is necessary to connect the end with shorter direct pipe сл the parties of a fuel tank.
|
|
|
Connect a hose of system of catching of steams of fuel and a returnable hose. Attach a hose of giving of fuel as is shown in drawing.
|
For connection of a pressure head hose with the fuel pump, temporarily tighten накидные nuts by hand, then tighten their moment of an inhaling recommended by the specification. At a tightening of nuts be cautious not to bend or to overwind a tube and to avoid damage of the fuel pump.
|
|
Connect a socket of the electric fuel pump.
|
|
|
|
|