Hyundai Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
Greasing system
Cooling system
- Fuel system
- Fuel system of petrol engines
Specifications
Search and elimination of malfunctions
Check of frequency of rotation of idling
Check of the fuel pump
Replacement of the fuel filter
Replacement of the terminator of overflow (the double-thread valve)
Replacement of the gauge of level of fuel
Checks of system of injection MFI
Control lamp of malfunctions (MIL)
Diagnostic codes of malfunctions
Gauges
Fuel atomizers
The modulator of management of frequency of rotation of a cranked shaft of the engine idling (ISC)
The gauge of speed of the car (VSS)
The detonation gauge (KS)
The ignition lock (ST) and the switch of ranges (TR) in cars with an automatic transmission
The ignition lock (ST) in cars with a mechanical transmission
The engine management block
The switch and the relay of a central air of air
The electromagnetic valve of clearing of the canister of system of catching of steams of fuel (EVAP)
The main relay MFI
The ignition coil
The fuel pump
The gauge of acceleration APS
The oil valve (OCV)
Fuel highway and atomizers
Throttle knot
Fuel tank
Pedal and accelerator cable
Fuel system of diesel engines
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes
|
Pedal and accelerator cable
Removal
|
|
|
|
Remove the plug and a tip of an internal part of a cable from the lever of a pedal of an accelerator.
|
|
|
Disconnect a socket from the switch of a pedal of an accelerator, turn out bolts and remove an arm of a pedal of an accelerator.
|
|
|
Check
|
|
Check up a cable of an accelerator and a cable cover on absence of damages.
Check up smoothness of moving of a cable of an accelerator in a cover.
Check up an accelerator pedal on absence of a bend.
Check up a condition of a returnable spring.
Check up a condition of a tip of a cable of an accelerator.
Check up functioning of the switch of a pedal of an accelerator.
|
|
Installation
|
|
|
|
Grease консистентной with greasing of a point of turn of a pedal of an accelerator.
|
For prevention of hit of steams and the fulfilled gases in car salon put hermetic on a carving of bolts of fastening of an arm of a pedal of an accelerator. The inhaling moment: 8–12 Nm
|
|
Insert a tip of a cable of an accelerator into capture on the end of the lever of a pedal of an accelerator.
|
|
|
Put universal консистентную greasing round a tip of a cable of an accelerator.
|
|
|
|
|