Hendaj Elantra
Petrol engines 1,6, 1,8 and 2,0 l
The diesel engine of 2,0 l
- Greasing system
   Specifications
   Check of level of engine oil
   Engine oil replacement
   Replacement of the oil filter
   Engine oil choice
   The oil pump of petrol engines
   The oil pump of diesel engines
   Oil radiator of diesel engines
Cooling system
Fuel system
Monitoring systems and decrease in toxicity of the fulfilled gases
Ignition system
System of preliminary heating of the diesel engine
Coupling
Mechanical transmission
Automatic transmission
Power shafts, forward and back axes
Suspension bracket
Steering
Brake system
Body
Air central air
The electric equipment
Electric schemes










Engine oil choice

Choice of engine oil for petrol engines

It is recommended to use engine oils of classification SG or SG/CD of classes of the viscosity resulted in drawings.

For maintenance of optimum greasing and the maximum protection of the engine choose the oils meeting following requirements:
– To correspond to classification API;
– To have corresponding viscosity SAE for a certain range of temperatures.

The recommended classification of engine oil for petrol engines on API: SH or above

Recommended on SAE viscosity of oil:

*1. Application is limited by environmental conditions.
*2. It is not recommended at steady movement of the car on high speed.

The recommended classification of engine oil for petrol engines on API: SH or above

Recommended on SAE viscosity of oil:

*1. Application is limited by environmental conditions.
*2. It is not recommended at steady movement of the car on high speed.

Choice of engine oil for diesel engines

It is recommended to use engine oils of classification SG or SG/CD of classes of the viscosity resulted in drawing.

The recommended classification on API: СЕ or above

Recommended on SAE viscosity of oil:

*1. Application is limited by environmental conditions.
*2. It is not recommended at steady movement of the car on high speed.

For maintenance of optimum greasing and the maximum protection of the engine choose the oils meeting following requirements:
– To correspond to classification API;
– To have corresponding viscosity SAE for a certain range of temperatures.